HP Integrated Lights-Out - Manual (Page 40)

Configuring iLO 2 40
If not, set the pass-through configuration to Enabled, and manually activate the terminal services
client.
Access options
iLO 2 enables you to modify iLO 2 access, including connection idle time, iLO 2 functionality, iLO 2
RBSU, login requirements, CLI parameters, minimum password length, and server name. Settings on the
Access Options page apply to all iLO 2 users. You must have the Configure iLO 2 Settings privilege to
modify settings on this page.
To view or modify iLO 2 access, click Administration>Access>Options and click Apply to save any
updated information. You must restart iLO 2 before your updates take effect. If any changes enable or
disable Lights-Out functionality, click Apply to terminate your browser connection and restart iLO 2. You
must wait at least 30 seconds before attempting to reestablish a connection.
The Options tab includes the following:
Parameter Default value Descriptions
Idle Connection
Timeout (minutes) 30 minutes This setting specifies the interval of user inactivity, in minutes,
before the web server and Remote Console session
automatically terminate. The following settings are valid: 15,
30, 60, 120 minutes, or 0 (infinite). The infinite timeout value
does not log out inactive users.