HP Integrated Lights-Out - Manual (Page 177)

HPQLOMIG directory migration utility 177
4. After the upgrade is complete, click Next.
During the firmware upgrade process, all buttons are deactivated to prevent navigation. You can still
close the application using the "X" at the top right of the screen. If the GUI is closed while programming
firmware, the application continues to run in the background and completes the firmware upgrade on all
selected devices.
HPLOMIG supports firmware flash on servers with a TPM chip. If a TPM module is present and enabled in
the server and Optional ROM measuring is enabled, HPLOMIG displays a warning message (shown
below.) If you select Yes, HPLOMIG will continue with the flash process. Otherwise firmware flash on the
selected server is skipped. This message displays every time a server with a TPM module is detected
during firmware flash.
Selecting a directory access method
After the Firmware Upgrade page, the Select Directory Access Method page displays. You can select
which management processors to configure (with respect to schema usage) and how it will be configured.