HP Integrated Lights-Out - Manual (Page 19)

iLO 2 setup 19
Setting up iLO 2 using iLO 2 RBSU
HP recommends iLO 2 RBSU to initially set up iLO 2 and configure iLO 2 network parameters for
environments that do not use DHCP and DNS or WINS. RBSU provides the basic tools to configure iLO 2
network settings and user accounts to get iLO 2 on the network.
You can use RBSU to configure network parameters, directory settings, global settings, and user accounts.
iLO 2 RBSU is not intended for continued administration. RBSU is available every time the server is booted
and can be run remotely using the iLO 2 Remote Console.
iLO 2 RBSU can be disabled in the Global Settings preferences. Disabling iLO 2 RBSU prevents
reconfiguration from the host unless the iLO 2 Security Override Switch is set.
To run iLO 2 RBSU to set up local accounts:
1. Restart or power up the server.
2. Press the F8 key when prompted during POST. The iLO 2 RBSU runs.
3. If prompted, enter a valid iLO 2 user ID and password with the appropriate iLO 2 privileges
(Administer User Accounts>Configure iLO 2 Settings). Default account information is located on the
iLO 2 Default Network Settings tag attached to the server containing the iLO 2 management
processor. If iLO 2 has not been configured to present a login challenge to the RBSU, no prompt will
appear.
4. Make and save any necessary changes to the iLO 2 configuration.
5. Exit iLO 2 RBSU.
Setting up iLO 2 using the browser-based option
Use the browser-based setup method if you can connect to iLO 2 on the network using a browser. You
can also use this method to reconfigure a previously configured iLO 2.
Access iLO 2 from a remote network client using a supported browser, and provide the default DNS
name, user name, and password. Default DNS name and account information is located on the iLO 2
Network Settings tag attached to the server containing the iLO 2 management processor.
When you successfully log onto iLO 2, you can change the default values of the local user accounts by
selecting User Administration under the iLO 2 Administration tab.
Activating iLO 2 licensed features using a browser
The Licensing page enables you to view the current license status and enter a key to activate iLO 2 license
features. The iLO 2 version and current license information is displayed in this section. If a license is
installed (including an evaluation license), the license number is displayed. See "Licensing (on page 25 )"
for more information about iLO 2 license options.
1. Log into iLO 2 through a supported browser.