HP Integrated Lights-Out - Manual (Page 68)

Configuring iLO 2 68
Enabling SNMP alerts
iLO 2 supports up to three IP addresses to receive SNMP alerts. Typically, the addresses used are the
same as the IP address of the HP SIM server console.
Only users with the Configure iLO 2 Settings privilege can change these settings. Users that do not have
the Configure iLO 2 Settings privilege can only view the assigned settings.
The following alert options are available in the SNMP/Insight Manager Settings screen:
• SNMP Alert Destination(s)
• iLO 2 SNMP Alerts
• Forward Insight Manager Agent SNMP Alerts
• SNMP Pass-thru
• p-Class Alert Forwarding (displayed on p-Class servers only)
For more information see to the HP Integrated Lights-Out Management Processor Scripting and Command
Line Resource Guide.
To configure alerts:
1. Log in to iLO 2 using an account that has the Configure iLO 2 Settings privilege.
2. Select Management in the Administration tab. The SNMP/Insight Manager Settings screen appears.
3. In the SNMP Alert Destination(s) fields, enter up to three IP addresses that you want to receive the
SNMP alerts and select the alert options you want iLO 2 to support.
4. Click Apply Settings.
Test alerts include an Insight Manager SNMP trap and are used to verify the network connectivity of iLO 2
in HP SIM. Only users with the Configure iLO 2 Settings privilege can send test alerts.
Be sure you have saved any changes to the SNMP Alert Destination(s) fields before sending a test alert.
To send a test alert:
1. Select Management in the Administration tab. The SNMP/Insight Manager Settings screen appears.
2. Click Send Test Alert in the Configure and Test SNMP Alerts section to generate a test alert and send
it to the TCP/IP addresses saved in the SNMP Alert Destinations fields.