HP Integrated Lights-Out - Manual (Page 67)

Configuring iLO 2 67
You cannot set the iLO 2 IP address if DHCP is enabled. Disabling DHCP allows you to configure the
IP address. The IP Address field also appears on the Network Settings page for your convenience.
Changing the value on either page changes the DHCP setting.
• IP Address is the iLO 2 IP address. If DHCP is used, the iLO 2 IP address is automatically supplied. If
not, enter a static IP address. The IP Address field appears on the Network Settings page for your
convenience. Changing the value on either page changes the IP address of iLO 2.
• Domain Name is the name of the domain where the iLO 2 subsystem resides. This name is assigned
by DHCP (if DHCP is enabled). Enabling DHCP allows you to configure the following DHCP options:
o Use DHCP Supplied Gateway—Toggles if iLO 2 uses the DHCP server-supplied gateway. If not,
enter an gateway address in the Gateway IP Address box.
o Use DHCP Supplied DNS Servers—Toggles if iLO 2 uses the DHCP server-supplied DNS server
list. If not, enter the DNS server address in the Primary, Secondary, and Tertiary DNS Server
fields.
o Use DHCP Supplied WINS Servers—Toggles if iLO 2 uses the DHCP server-supplied WINS
server list. If not, enter the WINS server address in the Primary and Secondary WINS Server
fields.
o Use DHCP Supplied Static Routes—Toggles if iLO 2 uses the DHCP server-supplied static route. If
not, enter the static route address in Static Route #1, Static Route #2, or Static Route #3 fields.
o Use DHCP Supplied Domain Name—Toggles if iLO 2 uses the DHCP server-supplied domain
name. If not, enter a domain name in the Domain Name box.
• WINS Server Registration toggles if iLO 2 registers its name with a WINS server.
• DDNS Server Registration toggles if iLO 2 registers its name with a DDNS server.
• Ping Gateway on Startup option causes iLO 2 to send four ICMP echo request packets to the
gateway when iLO 2 initializes. This option ensures that the ARP cache entry for iLO 2 is up-to-date
on the router responsible for routing packets to and from iLO 2.
• DHCP Server is the IP address of the DHCP server. This field cannot be assigned. It is received from
DHCP if DHCP is enabled and represents the last known valid DHCP server address.
• Primary, Secondary, and Tertiary DNS Server are the IP addresses of the DNS servers. If supplied by
the DHCP server, these fields are automatically populated. Otherwise, enter the IP addresses
manually.
• Primary and Secondary WINS Server are the IP addresses of the WINS servers. If supplied by the
DHCP server, these fields are automatically populated. Otherwise, enter the IP addresses manually.
• Static Route #1, Static Route #2, and Static Route #3 (destination, gateway) are the network
destination gateway addresses. Enter up to three network destination/gateway routing pairs.
SNMP/Insight Manager settings
The Management option of the Administration section displays the SNMP/Insight Manager Settings page.
The SNMP/Insight Manager Settings page enables you to configure SNMP alerts, generate a test alert,
and configure integration with HP SIM.