Section 12 monitoring the storpoint cd, Event log, Section 12 – Axis Communications CD E100 User Manual
Page 111: Monitoring the storpoint cd
Section 12: Monitoring the StorPoint CD
AXIS StorPoint CD E100 User’s Manual
111
Section 12 Monitoring the StorPoint CD
This section describes the following monitoring tools:
Event Log
The event log is stored in the
logfile.txt
file located in the
System/ServerProperties
folder. In the event log, the StorPoint CD writes
information such as:
Information, e.g. completed tasks
Warnings, e.g. hard disk full
Errors, e.g. installation failures
To display the event log, follow these steps:
1. Start your Web browser, and enter the name or IP address of the StorPoint
CD in the location/address field.
2. Click admin. You will be prompted for the Server password. By default, this
is set to
pass
. To change the password, see “Server Password” on page 24.
3. Click Event Log.
All events are viewed in the same order as they entered the log.
Notes:
❏ If a synchronization source has been found or if the correct date and time
have been set manually, date information will appear in the log file.
❏ When the server is restarted, a sub-set of critical events will remain in the
event log.
❏ Click Clear Event Log, to clear the event log of events.
Tools
See ...
AXIS ThinWizard - a tool for locating and managing
all the AXIS servers on your network