Accessing the discs, General disc settings – Axis Communications CD E100 User Manual
Page 34
Section 3: Microsoft & IBM Networks (SMB)
34
AXIS StorPoint CD E100 User’s Manual
Accessing the Discs
The StorPoint CD makes your networked CD/DVD-ROMs available to anyone
who has the appropriate privileges on the network. Users will access the
StorPoint CD just as any other workstation or file server.
The way you access the StorPoint CD resources depends on your network
environment:
Notes:
❏ The examples will assume that you have not changed the default server
name. The default server name is AXIS<nnnnnn> where <nnnnnn> are the
six last digits of the StorPoint CD serial number. If you have changed the
server name, use the new name where the examples refer to the default
name.
❏ Depending on the access rights set up by the Administrator, you might be
prompted to supply a password or receive a message similar to ‘
Access is
denied
’ when trying to access a shared resource on the StorPoint CD. The
default Server password is
pass
.
❏ In the Windows 95/98/2000/ME and Windows NT 4 environments, you
can install the AXIS StorPoint Disco utility, which is a powerful Windows
application for locating and using CD/DVD-ROMs located on AXIS
storage servers, wherever they are on your network. Refer to “AXIS StorPoint
DISCO ” on page 93.
General Disc Settings
To specify the general settings for an inserted disc, follow these steps:
1. Start your Web browser, and enter the name or IP address of the StorPoint
CD in the location/address field.
2. Click admin. You will be prompted for the Server password. By default, this
is set to
pass
.
3. Click Discs & Drives.
4. Locate the desired disc.
Network environments
See ...
Windows 95/98/2000/ME & Windows NT
DOS