Axis Communications CD E100 - Manual (Page 49)

Section 4: NetWare (NCP)
AXIS StorPoint CD E100 User’s Manual 49
Example (NDS settings):
The StorPoint CD is placed in Eastern United States. The name of your
NDS tree is ACMECORP, the name of the context where you wish to
install the StorPoint CD is Corp.Acme, and the administrator’s name is
Admin.Acme. Specify these parameters:
5. Save the config.ini file to start the NDS server installation. The installation
takes about 15 seconds, after which users will be able to access the StorPoint
CD in NDS mode.
6. Check the logfile.txt file to verify that the StorPoint CD was successfully
installed. See “Installation Errors in NetWare NDS” on page 50.
7. Restart your StorPoint CD after the installation.
8. After the installation you must logout and then login again to have all the
necessary rights on the StorPoint CD server object and the associated volume.
Using the NWAdmin, you will find a new server object and corresponding
volume object in the context you chose above.
The StorPoint CD installed in the NDS Tree
Note:
❏ You can display Details in NWAdmin to verify the syntax of the
NDSServerContext and NDSAdminName parameters.
[Server]
TimeZone = US_CAN_Eastern
TimeSyncSource = NDS
...
[NetWare]
NWEnable = yes
IPXEnable = yes
NetWareIP_Enable = yes
PureIPEnable = no
ServerName = AXIS<nnnnnn>_NW
NDSEnable = yes
NDSTreeName = ACMECORP
NDSServerContext = Corp.Acme
NDSAdminName = Admin.Acme
NDSAdminPassword = secret
NDSInstall = install
NDSRightsStorage = NDS
TimeSyncSources = SAP