Axis Communications CD E100 - Manual (Page 37)

Section 3: Microsoft & IBM Networks (SMB)
AXIS StorPoint CD E100 User’s Manual 37
6. Click OK. The StorPoint CD is ready for use.
Windows for
Workgroups 3.x
In Windows for Workgroups on an SMB client, follow these steps:
1. Start the File Manager.
2. From the Disk menu, select Connect Network Drive… Double click
Workgroup. The following dialog is displayed. You may have to click
Browse>> to see the complete dialog.
3. In the top listing, double click the entry for your StorPoint CD. The default
name is AXIS<nnnnnn>, where <nnnnnn> are the six last digits of the
StorPoint CD serial number.