Axis Communications CD E100 - Manual (Page 136)

Appendix B: Troubleshooting
136 AXIS StorPoint CD E100 User’s Manual
Errors when Writing Data to a Disc
The writing speed is by default set to the maximum speed for the currently used
drive. If you experience problems when writing data to a disc, changing the
writing speed might solve your problem.
To change the writing speed, follow these steps:
1. Start the Web browser and enter the IP address of your StorPoint CD in the
location/address field.
The StorPoint CD File View page is displayed.
2. Click admin. You will be prompted for the Server username and password. By
default, these are set to root and pass .
3. On the Server Settings page, click the Disc Drive icon that corresponds
to the CD-Recordable drive on the Server Settings page. The Disc Drive view
will be displayed.
4. Click the Change button. The Set Writing Speed dialog appears on the screen.
5. Select the required writing speed from the drop-down list and click OK.
The selected writing speed will now be displayed on the Disc Drive view.