Axis Communications CD E100 - Manual (Page 15)

Section 2: Installing the StorPoint CD
AXIS StorPoint CD E100 User’s Manual 15
Example
The serial number of your StorPoint CD is 00408C3E5207 and you want to assign
it the IP address 192.16.253.80. Your Windows client has the IP address
192.16.6.40. You enter 3E5207_253_80 in the location/address field.
The StorPoint CD will retrieve the first two groups of the new IP address
from the subnet where the client issues the broadcast.
When the IP address has been successfully set, the StorPoint CD File View
page will appear in your Web browser.
Important!
❏
You must have the NetBEUI protocol enabled. In Windows 2000, this is not the
default setting.
❏ The new IP address must be set within 30 minutes after restart.
❏ This method will work for most Windows configurations. However, if you
experience problems when using this method, we recommend that you use
the AXIS IP Installer for setting the IP address. See “AXIS IP Installer ” on
page 15.
AXIS IP Installer AXIS IP Installer is an application that allows you to assign IP addresses to your
StorPoint CD, find IP addresses of already installed StorPoint CDs and access
the StorPoint CD internal Web pages for easy configuration.
The required utility software is available on the AXIS Online CD. It can also be
downloaded from the Axis Web Site at http://www.axis.com
Follow these steps to install the AXIS IP Installer:
1. Locate the setup file,
Setup.exe
, and choose the Run option from the
Windows Start menu.
2. Follow the instructions as they appear on the screen.
When finished, the AXIS IP Installer will be available from your Start menu. To
run the program, select Programs | Axis Communications | AXIS IP Installer.
1. Select the serial number
of your AXIS StorPoint
server in this list.
2. Enter the desired IP
address in this field.