Axis Communications CD E100 - Manual (Page 116)

Section 12: Monitoring the StorPoint CD
116 AXIS StorPoint CD E100 User’s Manual
Creating a
Network Group
Before you can access your StorPoint CD via AXIS ThinWizard, you must first
create an appropriate network group. A network group is defined by the specific
IP address ranges and server types i.e. storage servers, print servers etc. that are
included.
Follow these steps to create a network group:
1. Click Network Groups in the AXIS ThinWizard main menu.
2. Click Create.
3. The Create Network Group page opens. Type a name for the new network
group.
4. Specify the IP address ranges and AXIS server types to be included in the
network group. If you are only interested in storage servers, deselect all options
but the Storage Servers option.
5. Click OK to create the network group.
Note:
❏ You can create as many network groups as you need.
Accessing the
StorPoint CD
Follow these steps to access the StorPoint CD Web pages via AXIS ThinWizard:
1. Click Manage Network in the AXIS ThinWizard main menu.
2. Select the network group that includes your StorPoint CD from the pull-down
list.
3. All the detected AXIS servers included in the network group are listed.
4. Click the IP Address link of your StorPoint CD. The StorPoint CD File View
page appears.
Note:
❏ The AXIS ThinWizard can also be used for upgrading the StorPoint CD
software. Refer to “Upgrading the Firmware” on page 142.