Axis Communications CD E100 - Manual (Page 22)

Section 2: Installing the StorPoint CD
22 AXIS StorPoint CD E100 User’s Manual
4. The Server Settings page is displayed. From this page you can edit the system
settings and display information about the connected drives. You can also view
the current configuration settings, shutdown the server, restart the server and
restore the factory default settings.
SCSI Server - the icons displayed to the left represent all the units
connected to the SCSI bus listed by SCSI ID.
IDE Server - the icons displayed to the left represents all the units
connected to the IDE bus listed as Master or Slave for each bus
To display information on a particular device, simply click the
corresponding icon:
Server
Disc drive or LUN expander (LUN expander only applies to SCSI)
Changer
Hard disk