Axis Communications CD E100 - Manual (Page 131)

Appendix B: Troubleshooting
AXIS StorPoint CD E100 User’s Manual 131
Restoring Factory Default Settings
If required, you can restore the factory default settings to your StorPoint CD.
This might be needed if you have disabled all the network protocols, or if you
have lost the Server password.
You can use any of these methods:
• Web browser
• Config.ini
• Push button
Step by step instructions for each method are given below.
Caution!
❏ The node address, the Hardware Address parameter, will remain
unchanged, but all other parameters will be restored. You will thus need to
re-assign the IP address in order to re-establish the Web browser
connection.
Web Browser To restore the defaults settings using a Web browser:
1. Start the Web browser.
2. Enter the name or IP address of your StorPoint CD in the location/address
field.
3. Click admin. You will be prompted for the Server password. By default, this
is set to pass .
4. Click Server Settings.
5. Click Factory Defaults.
6. Select the required factory default option.
Note:
❏ If you select the Configurations or the All option, you will need to re-assign
the IP address as described in “Assigning an IP Address ” on page 13.
7. Click OK.
The factory default setting will now be restored and the StorPoint CD will
automatically restart.