Axis Communications CD E100 - Manual (Page 64)

Section 4: NetWare (NCP)
64 AXIS StorPoint CD E100 User’s Manual
Windows NT 3.51
(NDS Mode)
On Windows NT 3.51 on an Novell NetWare client for NDS, follow these
steps:
1. Start the File Manager.
2. From the Disk menu, select Connect Network Drive…
3. In the listing, open the Novell Directory Servers folder.
4. Open the NDS tree and the context in which the StorPoint CD is installed.
The default name is AXIS<nnnnnn>_NW_SYS, where <nnnnnn> are the six
last digits of the StorPoint CD serial number.
5. To connect a StorPoint CD resource, select:
• SYS for root level access
• Volumes for access to all the discs
• the volume name for access to an individual disc, e.g. office
6. Select a drive letter for your StorPoint CD.
7. Check Reconnect at Logon if you wish to use the resource under the same drive
letter the next time you start your computer.
8. If you wish to connect using a different user name, enter the name in the
Connect As box. Otherwise, leave the box empty.
9. Click OK. The StorPoint CD is now ready for use.
Windows NT 3.51
(Bindery Mode)
On Windows NT 3.51 on an Novell NetWare client for bindery mode, follow
these steps:
1. Start the File Manager.
2. From the Disk menu, select Connect Network Drive…
3. In the listing, open the IntranetWare Servers folder.