Axis Communications CD E100 - Manual (Page 59)

Section 4: NetWare (NCP)
AXIS StorPoint CD E100 User’s Manual 59
6. Once you are logged on to the StorPoint CD, expand the SYS and Volumes
folders to display all the discs:
Note:
❏ If the Show All Volumes parameter is set to yes, the individual discs will be
shown at the same level as SYS. Some applications will not run properly
unless the data is stored at root level. To avoid such problems, assign a drive
letter to that particular volume.
7. To map a StorPoint CD resource to a drive letter, locate:
• SYS for root level access
• Volumes for access to all the discs
• the volume name for access to an individual disc, e.g. office97
8. Right click the resource and select Map Network Drive...
9. Select a drive letter for your StorPoint CD.
10. Check Reconnect at logon if you wish to use the resource under the same drive
letter the next time you start your computer.
Click OK. The StorPoint CD is ready for use.