Axis Communications CD E100 - Manual (Page 118)

Appendix A: Parameter List
118 AXIS StorPoint CD E100 User’s Manual
BusMode = Asynchronous Specifies the transfer mode on the SCSI bus: Asynchronous,
Synchronous, Fast-10 or Ultra.
[IDE]
JukeBoxLockTime = 0 Specifies the maximum duration for a data read operation during
multiple access requests to prevent disc changer fluttering. Default
is 0 seconds which disables the function.
[IP]
InternetAddress = 192.36.253.80 The StorPoint CD IP address.
DefaultRouter = 0.0.0.0 The IP address for the default router. All traffic directed outside
the local network (according to the NetMask) is sent to the default
router. Any re-routing via other routers is done automatically. The
default 0.0.0.0 indicates that no default router is set.
NetMask = 0.0.0.0 Used to determine when the traffic should be sent via a router. For
example, the normal class C mask is 255.255.255.0. The default
0.0.0.0 indicates that automatic router sensing is used.
BOOTPEnable = yes Enables BOOTP IP address setup.
DHCPEnable = yes Enables DHCP IP address setup.
RARPEnable = yes Enables RARP IP address setup.
DomainName = Name of the domain to which the StorPoint CD belongs.
PrimaryDNS = 0.0.0.0 The IP address of the primary DNS server. Used for identifying
computers with names instead of IP addresses.
SecondaryDNS = 0.0.0.0 The IP address of the secondary DNS server, should the primary
DNS server be unavailable or disconnected.
NTPServer = Name or IP address for the NTP server.
EnableWINS = no Enables WINS over NetBIOS/TCP/IP.
PrimaryWINSserver = 0.0.0.0 The IP address of the primary WINS server.
SecondaryWINSserver = 0.0.0.0 The IP address of the secondary WINS server, if required.
ProtectIP = no Protects the StorPoint CD from changing the IP address using the
ARP or Web browser method. Default is no, which allows the IP
address to be set within 30 minutes from restart.
SLPDirectoryAgent1 = auto The IP address or DNS name of an SLP directory agent.
SLPDirectoryAgent2 = auto The IP address or DNS name of an SLP directory agent.
SLPScopeList = DEFAULT The SLP scope to which the StorPoint CD belongs. SLP scopes are
used for collecting services into logical or administrative groups.
Specify the scope names in a list separated by commas, i.e.
scope1,scoper2,scope3... The default value DEFAULT means that no
specific scope will be configured.
[HTTP]
HTTPEnable = yes Enables HTTP. Set to no to restrict users from accessing the
CD-ROMs from a Web browser.
EnableMediaAccess = yes Enables access to the inserted discs. When set to no, only
administration is available from HTTP.
ExternalLink = Specifies the URL to a customized link, e.g. to your company’s Web
site. The link will be available from the StorPoint CD Web
interface.
ExternalImage = Specifies the URL to the image that will indicate the customized
external link.
[FTP]
FTP User name = Alternative user name for accessing the StorPoint CD Volumes
folder via FTP.
FTP User password = Once written into the configuration file, the password will not be
shown but replaced with *’s, representing each letter of the
password.
Timeout in seconds = 0 The time of inactivity in seconds after which an FTP is closed down.
FTP Max Users = 10 The maximum number of simultaneous FTP sessions.
[SMB]
SMBEnable = yes Enables SMB.
ServerName = The server name in the SMB environment. Default is AXIS<nnnnnn>
where nnnnnn are the last six digits of the serial number.
Parameter name Value Description