Axis Communications CD E100 - Manual (Page 145)

Appendix C: Upgrading the StorPoint CD
AXIS StorPoint CD E100 User’s Manual 145
Extending the RAM Memory
This section describes how to increase the performance of your StorPoint CD by
adding extra memory.
The basic 32 MB of RAM can be increased up to 160 MB. The extra cache
memory will speed-up data flow rates, especially when several users are accessing
the same disc.
Memory Modules You can add one module of either 32, 64 or 128 MB in size.
32 Mbyte Module • 144-pin 8-byte SO DIMM
• 4Mx16 EDO DRAM based (4 pcs.)
• 3.3V
• 50 ns
• 4k refresh cycles
• A0-A11 address inputs
Use one of these modules or equivalent:
64 Mbyte Module • 144-pin 8-byte SO DIMM
• 4Mx16 EDO DRAM based (8 pcs.)
• 3.3V
• 50 ns
• 4k refresh cycles
• A0-A11 address inputs
Use one of these modules or equivalent:
Manufacturer Type
Admor Memory P/N AD32-SO4643E
Centon P/N CAX4MX64-5EVDG
Samsung P/N KMM466F404BS2-L5
Toshiba P/N THL64V4075ATG-5
Viking P/N VC4641U4EN3-HT01
Golden RAM P/N 92G7342
QAX100 64bit EDO
Manufacturer Type
Admor Memory P/N AD64-SO8643E
Centon P/N CAX8MX64-5EVDG
Samsung P/N KMM466F804BS1-L5
Toshiba P/N THL64V8015ATG-5
Golden RAM P/N 76H0268
QAX100 64bit EDO