HP MPX200 Multifunction Router User Manual
Page 104
The following example shows the scrub_lun add command:
nl
MPX200 <1> (miguser) #> scrub_lun add
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Index WWPN, PortId/ iScsiName, Ip Add Symbolic Name Target Type
----- --------------------------------- -------------------- ------------
0 :00:1f:e1:50:0a:e1:49, 8c-02-00 HP HSV200-0 Src+Dest
1 :06:01:62:41:e0:49:2e, 82-01-00 DGC RAID-2 Src+Dest
2 :00:1f:e1:50:0a:37:18, 82-04-00 HP HSV210-2 Src+Dest
3 0a:09:82:98:8c:a7:79, 61-13-00 NETAPP LUN-3 Src+Dest
nl
Please select a Target from the list above ('q' to quit): 0
Index (VpGroup Name)
----- --------------
1 VPGROUP_1
Please select a VPGroup for Lun ('q' to quit): 1
nl
LUN Vendor LUN Size( GB) Attributes Serial Number/WWULN
--- ------ -------------- ---------- -------------------
1 HP 10.00 MAPPED PB5A8C3AATK8BW
60:05:08:b4:00:07:59:a4:00:02:d0:00:00:8d:00:00
2 HP 10.00 SRC LUN PB5A8C3AATK8BW
60:05:08:b4:00:07:59:a4:00:02:d0:00:00:90:00:00
3 HP 12.00 PB5A8C3AATK8BW
60:05:08:b4:00:10:6b:ac:00:02:f0:00:00:b6:00:00
4 HP 10.00 PB5A8C3AATK8BW
nl
60:05:08:b4:00:10:6b:ac:00:02:d0:00:00:59:00:00
5 HP 10.00 PB5A8C3AATK8BW
60:05:08:b4:00:10:6b:ac:00:02:d0:00:00:5c:00:00
6 HP 10.00 PB5A8C3AATK8BW
60:05:08:b4:00:10:6b:ac:00:02:d0:00:00:5f:00:00
7 HP 10.00 PB5A8C3AATK8BW
60:05:08:b4:00:10:6b:ac:00:02:d0:00:00:62:00:00
8 HP 10.00 PB5A8C3AATK8BW
60:05:08:b4:00:10:6b:ac:00:02:d0:00:00:65:00:00
9 HP 100.00 DATA MGMT PB5A8C3AATK8BW
60:05:08:b4:00:10:6b:ac:00:02:a0:00:00:af:00:00
10 HP 3.00 PB5A8C3AATK8BW
60:05:08:b4:00:07:59:a4:00:02:e0:00:05:91:00:00
11 HP 4.00 PB5A8C3AATK8BW
60:05:08:b4:00:07:59:a4:00:02:e0:00:05:94:00:00
Please select a LUN ('q' to quit): 4
Please Enter a Job Description (Max = 64 characters)
default name [ HP HSV200-0:VPG1:004 ]
Index Group Owner Group Name
----- ----------- ----------
0 1 Group 0
Please select a Group that this Job should belong to [0]
Index Scrubbing Algorithm
----- ---------------------------------
0 ZeroClean [ 2 Pass ]
1 DOD_5220_22_M [ 4 Pass ]
2 DOD_5220_22_M_E [ 4 Pass ]
3 DOD_5220_22_M_ECE [ 8 Pass ]
Please select a Scrubbing Algorithm for this job [0] 2
nl
Do you wish to continue with the operation(yes/no)? [No] yes
Start Time (1=Now, 2=Delayed, 3=JobSerialScheduling, 4=ConfigureOnly) [Now ]
Successfully created Job
All attribute values for that have been changed will now be saved.
The following example shows the scrub_lun pause command:
nl
MPX200 <1> (miguser) #> scrub_lun pause
Job Type Status Job Description
ID
--- ---- ------------------------ -------------------------------------
0 Scrubbi.. Running (Pass: 1 13%) NETAPP LUN-3:VPG1:001
Please select a Job Id from the list above ('q' to quit): 0
All attribute values for that have been changed will now be saved.
The following example shows the scrub_lun resume command:
nl
MPX200 <1> (miguser) #> scrub_lun resume
Job Type Status Job Description
ID
--- ---- ------------------------ -------------------------------------
0 Scrubbi.. Paused (Pass: 1 13%) NETAPP LUN-3:VPG1:001
Please select a Job Id from the list above ('q' to quit): 0
All attribute values for that have been changed will now be saved.
The following example shows the scrub_lun rm command:
nl
104 Command line interface