HP MPX200 Multifunction Router - Manual (Page 123)

Process Blocks 8192/8192
Request Blocks 8192/8192
Event Blocks 4096/4096
Control Blocks 1024/1024
Client Req Blocks 8192/8192
FCIP Buffer Pool 0/0
FCIP Request Blocks 0/0
FCIP NIC Buffer Pool 0/0
1K Buffer Pool 69623/69632
4K Buffer Pool 4096/4096
Sessions 4096/4096
Connections:
GE1 256/256
GE2 256/256
In the following example, 10GbE ports are present and show all the ports connected:
MPX200 <1> #> show memory
Memory Units Free/Total
-------------- ----------
Physical 157MB/1002MB
Buffer Pool 7808/8832
Nic Buffer Pool 53344/65536
Process Blocks 8192/8192
Request Blocks 8192/8192
Event Blocks 4096/4096
nl
Control Blocks 1024/1024
Client Req Blocks 8192/8192
FCIP Buffer Pool 0/0
FCIP Request Blocks 0/0
FCIP NIC Buffer Pool 0/0
1K Buffer Pool 69632/69632
4K Buffer Pool 4096/4096
Sessions 4095/4096
Connections:
GE1 255/256
GE2 256/256
10GE1 2048/2048
10GE2 2048/2048
show mgmt
Displays management port information, including the IP address, subnet mask, and gateway.
Authority
guest
Syntax
show mgmt
Examples
The following example shows the show mgmt command:
MPX200 <1> #> show mgmt
Management Port Information
-----------------------------
IPv4 Interface Enabled
IPv4 Mode Static
IPv4 IP Address 172.35.14.53
IPv4 Subnet Mask 255.255.254.0
IPv4 Gateway 172.35.14.1
IPv6 Interface Disabled
Link Status Up
MAC Address 00-c0-dd-0d-a9-c1
Commands 123