HP MPX200 Multifunction Router - Manual (Page 87)

6=Windows2008, 7=HP-UX, 8=AIX,
9=Windows2012, 10=Other) [Windows ]
6–Command Line Interface
Initiator
6-26 ISR654609-00 G
All attribute values that have been changed will now be saved.
The following example shows the initiator mod command.
MPX200 <2> (admin) #> initiator mod
Index Type (WWNN,WWPN/iSCSI Name)
----- ----- ----------------------
0 FC 50:06:01:60:cb:a0:35:de,50:06:01:69:4b:a0:35:de
1 FC 20:01:00:e0:8b:a8:86:02,21:01:00:e0:8b:a8:86:02
2 FC 20:00:00:e0:8b:88:86:02,21:00:00:e0:8b:88:86:02
Please select an Initiator from the list above ('q' to quit): 1
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
OS Type (0=Windows, 1=Linux, 2=Solaris,
3=OpenVMS, 4=VMWare, 5=Mac OS X,
6=Windows2008, 7=HP-UX, 8=AIX,
9=Windows2012, 10=Other) [Windows ]
All attribute values that have been changed will now be saved.
The following example shows the initiator rm command:
MPX200 <1> (admin) #> initiator rm
Warning: This command will cause the removal of all mappings and maskings
associated with the initiator that is selected. All connections
involving the selected initiator will be dropped.
Index Type Status (WWNN,WWPN/iSCSI Name)
----- ---- ------ ----------------------
0 FC LoggedIn 20:00:00:05:1e:b4:45:fb,10:00:00:05:1e:b4:45:fb
1 FC LoggedIn 50:01:43:80:01:31:e2:69,50:01:43:80:01:31:e2:68
2 FC LoggedOut 20:00:00:e0:8b:89:65:44,21:00:00:e0:8b:89:65:44
3 FC LoggedIn 50:06:0b:00:00:1d:1c:fd,50:06:0b:00:00:1d:1c:fc
4 FC LoggedIn 20:00:00:e0:8b:89:17:03,21:00:00:e0:8b:89:17:03
5 FC LoggedIn 50:06:0b:00:00:c1:73:75,50:06:0b:00:00:c1:73:74
6 FC LoggedIn 50:01:10:a0:00:17:60:69,50:01:10:a0:00:17:60:68
Please select a 'LoggedOut' Initiator from the list above ('q' to quit): 2
All attribute values that have been changed will now be saved.
iscsi
Discovers the iSCSI target through the router’s iSCSI port, and logs in the user to the selected
discovered target.
Authority
admin
Syntax
iscsi
Commands 87