HP MPX200 Multifunction Router - Manual (Page 80)

Keywords
Acknowledges a successfully completed LUN compare job. After you run this command, the LUN compare
job is permanently deleted from the database. acknowledge
Schedules a standalone LUN compare job. You can name the job and associate it with a job group.
Scheduling options include: immediately, at a pre-defined later time, or by serial scheduling. Serial add
scheduling requires that you assign a priority to the job, which will be used to schedule it prior to (lower
priority value) or after (higher priority value) a specific job in the serial schedule job queue.
Interrupts a running LUN compare job. This command freezes the compare process. You can later resume
the job from the block where the compare was paused. pause
Resumes a paused LUN compare job. The job resumes from the block where the compare was paused. resume
Deletes a LUN compare job. rm
Removes the compare job from a peer blade when the owner blade is not up. rm_peer
Restarts a stopped LUN compare job. The compare process restarts from the first block. start
Stops running a LUN compare job. Use this command if you need to stop the compare process due to
some technical or business need. Use this command also on already-configured scheduled jobs to change
the scheduling time. stop
Examples
The following example shows the compare_luns acknowledge command:
MPX200 <1> (miguser) #> compare_luns acknowledge
nl Job Type Status Job Description
ID
---- ---- ------------------------ ------------------------------------
0 Offline Completed HP HSV200-0:0001 to DGC RAID-1:0000
nl
nl Please select a Job Id from the list above ('q' to quit): 0
nl
nl
All attribute values for that have been changed will now be saved.
The following example shows the compare_luns add command:
nl
nl MPX200 <2> (miguser) #> compare_luns add
nl A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Index WWPN, PortId Symbolic Name Target Type
----- --------------------------------- -------------------- ------------
0 20:78:00:c0:ff:d5:9a:05, 8c-01-ef HP MSA2012fc-0 Src+Dest
1 50:00:1f:e1:50:0a:37:18, 82-01-00 HP HSV210-3 Src+Dest
nl
nl Please select a Source Target from the list above ('q' to quit): 1
nl
Index (VpGroup Name)
----- --------------
1 VPGROUP_1
2 VPGROUP_2
3 VPGROUP_3
4 VPGROUP_4
nl Please select a VPGroup for Source Lun ('q' to quit): 1
nl
nl LUN Vendor LUN Size( GB) Attributes
--- ------ -------------- ----------
1 HP 10.00 SRC LUN
2 HP 10.00
3 HP 20.00
4 HP 20.00
5 HP 10.00
6 HP 5.00
7 HP 5.00
nl Please select a LUN as a Source Lun ('q' to quit): 1
nl
Index WWPN, PortId Symbolic Name Target Type
----- --------------------------------- -------------------- ------------
0 20:78:00:c0:ff:d5:9a:05, 8c-01-ef HP MSA2012fc-0 Src+Dest
1 50:00:1f:e1:50:0a:37:18, 82-01-00 HP HSV210-3 Src+Dest
nl Please select a Destination Target from the list above ('q' to quit): 1
nl Index (VpGroup Name)
----- --------------
1 VPGROUP_1
2 VPGROUP_2
3 VPGROUP_3
4 VPGROUP_4
nl
80 Command line interface