HP MPX200 Multifunction Router - Manual (Page 52)

7. In the Add Remote Router Status window, review the remote router configuration, and then
click Finish.
Figure 18 Add Remote Router Status window
8. To view information about the newly added remote peer router, select the remote peer node
in the router tree.
Figure 19 (page 52) shows an example.
Figure 19 View remote peer router information
To remove a remote peer:
1.
On the Wizards menu, click Remove Remote Peer Wizard. The Remove Remote Peer Wizard
opens and prompts you to Select a remote router to unmap.
2. Select the check box for the remote router that you want to remove, and then click OK.
3. In the LOCAL Router Admin Password dialog box, type the administrator password for the
remote router, and then click OK.
Importing a remote array
For remote migration using the Native IP method, create a remote peer connection, and then import
the remote array to the local router. Importing a remote array presents the remote array’s LUNs
on the local router so that you can use them as destination LUNs for data migration.
To import a remote array:
1.
On the Wizards menu, click Import Remote Array Wizard, and if prompted, select a blade.
The Import Remote Array Wizard opens and lists the known remote arrays.
2. Under Import Remote Array, expand the IP address tree.
3. Select the check box next to the name of the array name to be imported, and then click OK.
52 Performing data migration