Setting array properties – HP MPX200 Multifunction Router User Manual
Page 53
Advertising
Figure 20 Add imported array
4.
In the Import Remote Array Security Check dialog box, type the miguser password, and then
click OK.
Imported arrays are identified under the Array node in the Router Tree by the text [Imported].
Figure 21 View imported array
Setting array properties
HP mpx Manager enables you to configure the target type and bandwidth, and to enable load
balancing, for each storage array used in data migration.
To set array properties:
1.
In the left pane, click Arrays to view all the FC storage arrays detected by the MPX200.
2.
Click the storage array you want to use as the source array.
The Information page in the right pane displays all the properties currently set for the selected
array.
shows an example.
Setting array properties
53
Advertising