HP MPX200 Multifunction Router - Manual (Page 79)

this license in future for any array (including this array).
Do you want to remove the array license (Yes/No)? [No]
nl
WARNING: Removing physical targets associated with this array will remove
all LUN presentations (if any) to hosts from these targets.
Do you want to remove the physical targets for this array (Yes/No)? [Yes]
nl
All attribute values for that have been changed will now be saved.
array_licensed_port
Use with keyword rm to remove licensed offline array ports.
Authority
miguser
Syntax
array_licensed_port [keyword]
Keywords
The following example shows the array_licensed_port rm command:
Removes licensed offline array ports. Use this command to remove the ports (shown by the show
migration_usage
command) for which you have removed an array without also removing the array’s license.
rm
array_licensed_port rm
Examples
The following example shows the array_licensed_port rm command:
nl
MPX200 <1> (miguser) #> array_licensed_port rm
nl
nl
01. Symbolic name = DGC RAID-1
nl
No of ports registered = 2
WWNN, WWPN 50:06:01:60:cb:a0:35:de, 50:06:01:60:4b:a0:35:de
WWNN, WWPN 50:06:01:60:cb:a0:35:de, 50:06:01:68:4b:a0:35:de
nl
02. Symbolic name = DGC RAID-1
nl
No of ports registered = 2
WWNN, WWPN 50:06:01:60:cb:a0:35:de, 50:06:01:60:4b:a0:35:de
WWNN, WWPN 50:06:01:60:cb:a0:35:de, 50:06:01:68:4b:a0:35:de
nl
nl
Please select a Id to remove from the list above ('q' to quit): 01
nl
nl
All attribute values that have been changed will now be saved.
compare_luns
Manages data migration LUN comparison jobs, including scheduling, starting, stopping, pausing,
resuming, and deleting jobs, as well as acknowledging completed jobs.
Authority
miguser
Syntax
compare_luns [keyword]
Commands 79