Removing an offline array, Creating and removing a dml, Creating and removing a – HP MPX200 Multifunction Router User Manual
Page 69
5.
On the Confirm Acknowledgement dialog box, click Yes.
Removing an offline array
You should remove arrays used in data migration because they are kept in persistent storage. If
you used an array-based license for the data migration job and you plan to use this array again
for migration, you may keep the license when removing the array.
The MPX200 allows you to remove only offline arrays. To change the array state to offline, move
all array target ports to an offline state by removing target ports from the router port zone.
To remove an offline array:
1.
In the left pane of HP mpx Manager, click the Router tab.
2.
Under Arrays, right-click the name of the offline array you want to remove.
3.
On the shortcut menu, click Remove Offline Array.
To remove an imported array:
1.
On the local router, force down (disable) the local iSCSI ports.
2.
On the local router, issue the array rm command to clean up the presentations from the
remote router.
3.
On the local router, issue the remotepeer rm command.
4.
On the Data Migration Security Check dialog box, type the miguser password, and then click
OK.
Creating and removing a DML
This section provides the steps to create and remove a DML in HP mpx Manager. For a description
of the data management LUN, see
To create a data management LUN in HP mpx Manager:
1.
Start the Create Data Management LUN Wizard using one of these methods:
•
On the Wizards menu, click Create Data Management LUN, and then in the Select Blade
dialog box, choose Blade 1 or Blade 2.
•
In the router tree pane, right-click a blade, and then click Create Data Management LUN
to add a DML to the selected blade.
Removing an offline array
69