HP MPX200 Multifunction Router - Manual (Page 83)

MPX200 <1> (miguser) #> dml delete
Index SymbolicName
----- ------------
0 Data Mgmt Lun 0::1
1 Data Mgmt Lun 0::2
nl
Please select a Data Mgmt Lun from the List above ('q' to quit): 1
Successfully initiated Data Management Lun deletion
get_target_diagnostics
Obtains data (such as READ CAPACITY or INQUIRY) either from a single target port (if an array
is not formed) or from all target ports of an array and makes the data available for debugging
purposes. The data is either stored in a file or displayed on the CLI in a raw format. Manually
review the data with the SCSI specification documents.
The get_target_diagnostics command provides the following options:
•
Execute a custom command. This option lets you execute commands not included in the default
set and also other vendor-specific commands. Note that the custom command must only be a
READ type command.
•
Execute the default set of commands. The default command set includes the following
commands:
◦ REPORT LUNs
◦ INQUIRY:
– Standard INQUIRY
– Supported VPD pages
– Unit serial number
– Device identification
– Block limits VPD page
– Thin-provisioning VPD page
◦ REPORT SUPPORTED OPERATIONS CODES
◦ READ CAPACITY:
CDB 10 –
– CDB 16
◦ GET LBA STATUS
◦ REPORT TARGET PORT GROUPS
◦ TEST UNIT READY
◦ READ [1 block]
•
Execute one specific command from the default set. This option allows you to select one of the
commands from the default set.
Authority
admin
Syntax
get_target_diagnostics
Commands 83