HP MPX200 Multifunction Router User Manual
Page 94
60:05:08:b4:00:10:6b:ac:00:02:f0:00:00:b6:00:00
4 HP 10.00 PB5A8C3AATK8BW
60:05:08:b4:00:10:6b:ac:00:02:d0:00:00:59:00:00
5 HP 10.00 PB5A8C3AATK8BW
60:05:08:b4:00:10:6b:ac:00:02:d0:00:00:5c:00:00
6 HP 10.00 PB5A8C3AATK8BW
60:05:08:b4:00:10:6b:ac:00:02:d0:00:00:5f:00:00
7 HP 10.00 PB5A8C3AATK8BW
nl
60:05:08:b4:00:10:6b:ac:00:02:d0:00:00:62:00:00
8 HP 10.00 PB5A8C3AATK8BW
60:05:08:b4:00:10:6b:ac:00:02:d0:00:00:65:00:00
9 HP 100.00 DATA MGMT PB5A8C3AATK8BW
60:05:08:b4:00:10:6b:ac:00:02:a0:00:00:af:00:00
10 HP 3.00 PB5A8C3AATK8BW
60:05:08:b4:00:07:59:a4:00:02:e0:00:05:91:00:00
11 HP 4.00 PB5A8C3AATK8BW
60:05:08:b4:00:07:59:a4:00:02:e0:00:05:94:00:00
nl
Please select a LUN as a Source Lun ('q' to quit): 2
nl
Index WWPN, PortId/ iScsiName, Ip Add Symbolic Name Target Type
----- --------------------------------- -------------------- ------------
0 50:00:1f:e1:50:0a:e1:49, 8c-02-00 HP HSV200-0 Src+Dest
1 50:00:1f:e1:50:0a:37:18, 82-04-00 HP HSV210-2 Src+Dest
2 50:06:01:62:41:e0:49:2e, 82-01-00 DGC RAID-2 Src+Dest
3 iqn.2001-05.com., 30.30.30.2 EQLOGIC 100E-00-7 Src+Dest
4 iqn.2001-05.com., 30.30.30.2 EQLOGIC 100E-00-8 Src+Dest
5 50:0a:09:82:88:8c:a7:79, 61-12-00 NETAPP LUN-3 Src+Dest
nl
Please select a Destination Target from the list above ('q' to quit): 5
nl
Index (VpGroup Name)
----- --------------
1 VPGROUP_1
nl
Please select a VPGroup for Destination Lun ('q' to quit): 1
nl
LUN Vendor LUN Size( GB) Attributes Serial Number/WWULN
--- ------ -------------- ---------- -------------------
1 NETAPP 12.00 P3TPeJZ4dMV6
NETAPP LUN P3TPeJZ4dMV6
2 NETAPP 12.00 P3TPeJZ5qEQ5
NETAPP LUN P3TPeJZ5qEQ5
3 NETAPP 12.00 P3TPeJZ5qEnA
NETAPP LUN P3TPeJZ5qEnA
4 NETAPP 10.00 P3TPeJ/UDPrh
nl
nl
Please select a LUN as a Destination Lun('q' to quit): 1
Is destination LUN a thin provisioned LUN [y/n]: y
Do you wish to validate data on destination LUN [y/n]: y
I/O Size (0=32KB, 1=64KB, 2=128KB, 3=512KB, 4=1MB) [64KB ]
Please Enter a Job Description (Max = 64 characters)
default name [ HP HSV200-0:VPG1:002 to NETAPP LUN-3:VPG1:001 ]
Verify Data after Migration job is complete?(1=Yes, 2=No) [Yes ]
nl
Index Group Owner Group Name
----- ----------- ----------
0 2 Group 0
1 2 Test1
nl
Please select a Group that this Job should belong to [0]
Start Time (1=Now, 2=Delayed, 3=JobSerialScheduling, 4=ConfigureOnly) [Now ]
Successfully created Job
All attribute values for that have been changed will now be saved.
The following example shows the migration add command used for configuring an online data
migration job:
nl
MPX200 <1> (admin) (miguser) #> migration add
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Migration Type [ 1=Offline (Local/Remote),
2=Online (Local),
3=Online (Remote) ] [ ] 2
Index WWPN, PortId/ iScsiName, Ip Add Symbolic Name Target Type
----- --------------------------------- -------------------- ------------
0 50:06:01:62:41:e0:49:2e, 61-00-00 DGC RAID-0 Src+Dest
1 50:00:1f:e1:50:0a:37:19, 82-0c-00 HP HSV210-1 Src+Dest
nl
nl
nl
Please select a Source Target from the list above ('q' to quit): 0
nl
Index (VpGroup Name)
----- --------------
1 VPGROUP_1
nl
Please select a VPGroup for Source LUN ('q' to quit): 1
nl
LUN Vendor LUN Size( GB) Attributes Serial Number/WWULN
--- ------ -------------- ---------- -------------------
2 DGC 2.000 APM00070900914
60:06:01:60:a0:40:21:00:50:e8:02:2f:22:eb:e0:11
3 DGC 2.000 APM00070900914
60:06:01:60:a0:40:21:00:16:39:31:64:82:ed:e0:11
4 DGC 2.000 APM00070900914
60:06:01:60:a0:40:21:00:68:48:f4:64:99:ed:e0:11
5 DGC 2.000 APM00070900914
94
Command line interface