HP MPX200 Multifunction Router User Manual
Page 95
60:06:01:60:a0:40:21:00:69:48:f4:64:99:ed:e0:11
6 DGC 2.000 APM00070900914
60:06:01:60:a0:40:21:00:b4:59:85:ba:b4:ed:e0:11
7 DGC 2.000 APM00070900914
60:06:01:60:a0:40:21:00:b5:59:85:ba:b4:ed:e0:11
8 DGC 2.000 APM00070900914
60:06:01:60:a0:40:21:00:be:b4:e5:ff:4e:ee:e0:11
9 DGC 2.000 APM00070900914
60:06:01:60:a0:40:21:00:bf:b4:e5:ff:4e:ee:e0:11
Please select a LUN as a Source Lun ('q' to quit): 2
Index WWPN, PortId/ iScsiName, Ip Add Symbolic Name Target Type
----- --------------------------------- -------------------- ------------
0 50:06:01:62:41:e0:49:2e, 61-00-00 DGC RAID-0 Src+Dest
1 50:00:1f:e1:50:0a:37:19, 82-0c-00 HP HSV210-1 Src+Dest
nl
Please select a Destination Target from the list above ('q' to quit): 1
nl
Index (VpGroup Name)
----- --------------
1 VPGROUP_1
nl
Please select a VPGroup for Destination LUN ('q' to quit): 1
LUN Vendor LUN Size( GB) Attributes Serial Number/WWULN
--- ------ -------------- ---------- -------------------
1 HP 10.000 PA299B1AASZ024
60:05:08:b4:00:05:4d:94:00:01:30:0b:fe:5a:00:00
2 HP 10.000 PA299B1AASZ024
60:05:08:b4:00:05:4d:94:00:01:30:0b:fe:5d:00:00
3 HP 10.000 PA299B1AASZ024
60:05:08:b4:00:05:4d:94:00:01:30:0b:fe:60:00:00
4 HP 10.000 PA299B1AASZ024
60:05:08:b4:00:05:4d:94:00:01:30:0b:fe:63:00:00
5 HP 100.000 PA299B1AASZ024
60:05:08:b4:00:05:4d:b0:00:01:50:1a:94:ad:00:00
nl
Please select a LUN as a Destination Lun('q' to quit): 1
Is destination LUN a thin provisioned LUN [y/n]: n
I/O Size (0=32KB, 1=64KB, 2=128KB, 3=512KB, 4=1MB) [64KB ]
nl
Please Enter a Job Description (Max = 127 characters)
default name [ DGC RAID-0:VPG1:002 to HP HSV210-1:VPG1:001 ]
nl
Index Group Owner Group Name
----- ----------- ----------
0 1 Group 0
Please select a Group that this Job should belong to [0]
Start Time (1=Now, 2=Delayed, 3=JobSerialScheduling, 4=ConfigureOnly) [Now ]
Successfully created Job
All attribute values for that have been changed will now be saved.
The following example shows the migration add command used to configure a remote online
data migration job:
MPX200 <2> (admin) (miguser) #> migration add
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Migration Type [ 1=Offline (Local/Remote),
2=Online (Local),
3=Online (Remote) ] [ ] 3
Index WWPN, PortId/ iScsiName, Ip Add Symbolic Name Target Type
----- --------------------------------- -------------------- ------------
0 50:06:01:62:41:e0:49:2e, 61-00-00 DGC RAID-0 Src+Dest
1 50:00:1f:e1:50:0a:37:19, 82-0c-00 HP HSV210-1 Src+Dest
Please select a Source Target from the list above ('q' to quit): 0
nl
Index (VpGroup Name)
----- --------------
1 VPGROUP_1
Please select a VPGroup for Source LUN ('q' to quit): 1
nl
LUN Vendor LUN Size( GB) Attributes Serial Number/WWULN
--- ------ -------------- ---------- -------------------
2 DGC 2.000 APM00070900914
60:06:01:60:a0:40:21:00:50:e8:02:2f:22:eb:e0:11
3 DGC 2.000 APM00070900914
60:06:01:60:a0:40:21:00:16:39:31:64:82:ed:e0:11
4 DGC 2.000 APM00070900914
60:06:01:60:a0:40:21:00:68:48:f4:64:99:ed:e0:11
5 DGC 2.000 APM00070900914
60:06:01:60:a0:40:21:00:69:48:f4:64:99:ed:e0:11
6 DGC 2.000 APM00070900914
nl
60:06:01:60:a0:40:21:00:b4:59:85:ba:b4:ed:e0:11
7 DGC 2.000 APM00070900914
60:06:01:60:a0:40:21:00:b5:59:85:ba:b4:ed:e0:11
8 DGC 2.000 APM00070900914
60:06:01:60:a0:40:21:00:be:b4:e5:ff:4e:ee:e0:11
9 DGC 2.000 APM00070900914
60:06:01:60:a0:40:21:00:bf:b4:e5:ff:4e:ee:e0:11
Please select a LUN as a Source Lun ('q' to quit): 4
nl
Index WWPN, PortId/ iScsiName, Ip Add Symbolic Name Target Type
----- --------------------------------- -------------------- ------------
Commands
95