HP MPX200 Multifunction Router - Manual (Page 131)

GE1 GE2 FC1 FC2
--------------------------------
0 0 189M 189M
0 0 188M 188M
0 0 182M 182M
0 0 187M 187M
0 0 188M 188M
0 0 186M 186M
0 0 187M 187M
0 0 186M 186M
0 0 170M 170M
0 0 189M 189M
nl
In the following example, 10GbE ports are present and shows all the ports
connected:
In the following example, 10GbE ports are present and shows all the ports connected:
nl MPX200 <1> #> show perf byte
nl WARNING: Valid data is only displayed for port(s) that are not
associated with any configured FCIP routes.
nl Displaying bytes/sec (total)... (Press any key to stop display)
GE1 GE2 10GE1 10GE2 FC1 FC2
------------------------------------------------
0 0 0 0 0 0
0 0 0 0 0 0
nl 0 0 0 0 0 0
nl 0 0 0 0 0 0
nl 0 0 0 0 0 0
nl 0 0 0 0 0 0
nl
0 0 0 0 0 0
show presented_targets
Displays all presented targets and their router virtual FC ports and iSCSI presented targets.
Authority
guest
Syntax
show presented_targets
Examples
The following example shows the show presented_targets command.
MPX200 <1> #> show presented_targets
Presented Target Information
------------------------------
FC/FCOE Presented Targets
----------------------
WWPN 21:04:00:c0:dd:13:2c:60
WWNN 20:04:00:c0:dd:13:2c:60
Port ID 82-0b-08
Port FC1
nl
<MAPS TO>
nl WWPN 50:00:1f:e1:50:0a:e1:48
WWNN 50:00:1f:e1:50:0a:e1:40
Port ID 82-0c-00
nl
VPGroup <GLOBAL>
nl
nl
WWPN 21:05:00:c0:dd:13:2c:60
WWNN 20:05:00:c0:dd:13:2c:60
Port ID 82-0b-0f
Port FC1
nl <MAPS TO>
nl WWPN 50:06:01:62:41:e0:49:2e
WWNN 50:06:01:60:c1:e0:49:2e
Port ID 82-01-00
nl VPGroup <GLOBAL>
iSCSI Presented Targets
-------------------------
Name iqn.1986-03.com.hp:fcgw.mpx200.0851e00035.b1.01.50001fe1500ae148
nl <MAPS TO>
nl
Commands 131