HP MPX200 Multifunction Router - Manual (Page 55)

Creating a data migration job group
Follow these steps to create a data migration job group in HP mpx Manager.
To create a data migration job group:
1.
In the left pane, click the Services tab to open the Services page.
By default, the MPX200 shows Group 0 created under the Data Migration Jobs item in the
left pane.
2. In the left pane, right-click Data Migration Jobs, and then on the shortcut menu, click Add
Group. (Or on the Wizards menu, click Add Group.)
3. In the Create New Group dialog box, enter a group name that you want to assign to administer
a set of data migration jobs, and then click OK.
4. In the Data Migration Security Check dialog box, enter the data migration user password
(default is migration), and then click OK.
Using the data migration wizard
The data migration wizard helps simplify the configuration and scheduling of both individual and
batches of data migration jobs. The following sections provide wizard details on starting and using
the data migration wizard to schedule individual and batch migration jobs.
Starting the data migration wizard
Follow these steps to start the data migration wizard, and then proceed with scheduling either an
individual or batch data migration job.
CAUTION: Before starting an offline data migration job, ensure that the host has no direct access
to the source LUN. For online data migration, ensure that only router paths are available to the
host.
Before acknowledging a data migration job, ensure that the source and destination LUNs are not
presented to any host.
To start the data migration wizard:
1.
Start HP mpx Manager and connect to the MPX200 by providing the IP address of the MPX200.
2. Start the data migration wizard using one of these methods:
•
On the Wizards menu, click Configure Migration Jobs.
•
In the left pane, open the Services page, right-click the Data Migration Jobs node, and
then click Configure Migration Jobs.
3. If the Data Migration Security Check dialog box appears, enter the data migration user
password (default is migration), and then click OK.
4. If the Confirm System Time Update dialog box appears warning you of a 30 minute or more
discrepancy between the host's time and the system time, do one of the following:
•
Click Yes to update the system time to match the host time.
•
Click No to keep the current system time. Note that a time discrepancy can affect job
scheduling.
5. If the Confirm LUN Filtering dialog box appears, click Yes to have HP mpx Manager hide
LUNs belonging to existing data migration jobs, or No to show all LUNs.
6. In the Create Data Migration Job dialog box, click Options.
Creating a data migration job group 55