HP MPX200 Multifunction Router - Manual (Page 126)

Source Lun End Lba 20971519
Destination Array 3PARdata VV-1
Destination Lun VPG:ID 1:0
Destination Lun WWULN 50:00:2a:c0:00:02:1a:f8
Destination Serial Number 01406904
Destination Lun Size 10.000 GB
Destination Lun Start Lba 0
Destination Lun End Lba 20971519
Compared Data Size 20971520 Blocks (1 Block is of 512 bytes)
show migration_logs
Displays the data migration logs and the operation performed on them.
Authority
guest
Syntax
show migration_logs
Examples
The following example shows the show migration_logs command:
MPX200 <1> #> show migration_logs 6
Mon Jan 10 13:23:14 2011
Seq id: 448 : Job Type: Migration (Remote Online) : Destination LUN : Thin
Provisioned : Validate Destination LUN : Yes :miguser :ADDED : MigrOwner 1 :
Job UUID 0834E00029b173 : JobId 0(Online (Remote)) of group Group 0 with
priority 0 from Target DGC RAID-1 VpGroup 1 Lun
60:06:01:60:f9:31:22:00:01:b7:e7:2d:6e:1a:e0:11(1) Start Lba 0 to Target
NETAPP LUN-0 VpGroup 1 Lun NETAPP LUN C4i/aJaJ1e-V(1) Start Lba 0 with
migration size 1.00 GB (2097152 Blocks)
nl Mon Jan 10 13:23:15 2011
Seq id: 449 : Job Type: Migration (Remote Online) : Destination LUN : Thin
Provisioned : Validate Destination LUN : Yes :miguser :STARTING MIGRATION :
MigrOwner 1 : Job UUID 0834E00029b173 : JobId 0(Online (Remote)) of group Group
0 with priority 0 from Target DGC RAID-1 VpGroup 1 Lun
60:06:01:60:f9:31:22:00:01:b7:e7:2d:6e:1a:e0:11(1) to Target NETAPP LUN-0
VpGroup 1 Lun NETAPP LUN C4i/aJaJ1e-V(1) with migration size 1.00 GB (2097152
Blocks)
nl Mon Jan 10 13:23:38 2011
Seq id: 450 : Job Type: Migration (Remote Online) : Destination LUN : Thin
Provisioned : Validate Destination LUN : Yes :miguser :COMPLETED : MigrOwner 1
: Job UUID 0834E00029b173 : JobId 0(Online (Remote)) of group Group 0 with
priority 0 from Target DGC RAID-1 VpGroup 1 Lun
60:06:01:60:f9:31:22:00:01:b7:e7:2d:6e:1a:e0:11(1) to Target NETAPP LUN-0
VpGroup 1 Lun NETAPP LUN C4i/aJaJ1e-V(1) with migration size 1.00 GB (2097152
Blocks)
To view the data migration job log in the CLI:
1.
Open a miguser session using the following command:
nl
miguser start -p migration
2. To view all logs related to all migration jobs, enter the following command:
nl
show migration_logs
3. To view only a limited number of log entries, specify a value; for example,
nl
show migration_logs 5 .
4.
nl
To display n entries from offset m, which starts from the start of migration log file, enter the
following command:
nl
show migration_log n m
For example:
nl
MPX200 <1> #> show migration_logs 5 2
Mon Jan 12 06:42:43 2011
126 Command line interface