American Fibertek Commander C10e-PoE/C10p-PoE User Manual
Page 101
101
Reboot
Reboot Selection: It the event that Commander should stop operating or a new firmware update
applied, it can be remotely rebooted.
If a reboot become necessary, click on the “Reboot” button in the mode selection area.
Warning
: Rebooting will cause all event data to be lost. Make certain you back up your
data on a regular basis.
After requesting a reboot a pop up will appear asking you to confirm your decision.
Notes on Reboot:
Under certain conditions you may not be able to reboot using the client and a hard reset maybe
come necessary.
Only the Master Admin has access to this reboot function.
Warning
: Reboot will result in a loss of all data. Make certain that you back up your data on a
regular basis using the Save As function and or Email. Rebooting will not affect your
programming and after reboot Commander will return to its previously programmed operation.