American Fibertek Commander C10e-PoE/C10p-PoE - Manual (Page 81)

81
Auxiliary Set Up
This set up defines the action to be taken for each of the 2 auxiliary outputs when they are
triggered per the previous alarm or sensor set ups.
Email Address
Enter an email address where an email alert will be sent. More than one email address can be
entered. Make sure email addresses are separated by a space
Auxiliary Name
Enter a name for the auxiliary output. This is the name that will appear in the tree view and logs.
Names can be up to 40 characters.
Auxiliary Action
Select Log, Alert and Email by clicking at the
corresponding check box.
Log: will enter the on and off auxiliary date and
time in the log.
Alert: will send an alert to the location
programmed by the Master Admin.
Email: will send an email alert to the address
entered above.