American Fibertek Commander C10e-PoE/C10p-PoE - Manual (Page 30)

30
Next Check the FTP and/or SMTP providing
that user permission to FTP and/or Email. Fill in
the Email address. This will be the specific
email address for that operator. All functions
with email capacity will send their emails to that
address. FTP user name and Password is the
same as the user name and password.
Click the Add User icon and a pop up box will appear asking to confirm your decision. Clicking
OK will complete the process of adding the operator. Clicking Cancel will return to the previous
screen
Operator Set Up-Modifying an Operator
Click on the Modify icon to display the “Update
User” screen. Make any changes as required and
click on the “Submit” button. If the modification
is accepted, the screen will go to the operator set
up.
Operator Set Up-Deleting an Operator
In the Operator Setup click on the “Delete” icon associated with the operator you wish to delete.
A pop box will appear asking you to confirm
your decision. Click OK to delete the operator.
Click on the Cancel button to return to the
previous screen.