American Fibertek Commander C10e-PoE/C10p-PoE - Manual (Page 74)

74
PortFlow™: Setup: Selecting the Port to Program
Selecting the Port by Name:
If the port has been previous name it can be
selected by the name drop down box.
To Name a Port or
Change a Port Name:
Fill in a name to right hand side of the
drop down box. Once the save
function has been perform that name
will appear in all logs and set up
operations
Polling Setting:
The polling setting will determine how often the
selected Port is polled. The reading taken at the
time of the poll will be entered in the Poll Log.
0-Sec equals no polling action.