American Fibertek Commander C10e-PoE/C10p-PoE - Manual (Page 59)

59
Log Filtering
The sort function is divided into Four Major areas.
They are:
1. Start Time and Date/End Time and Date
2. Probe
3. Contact
4. Auxiliary
Port Filter functions are found under probes
Time and Date:
Click the Calendar next to the start date and
select the starting date from the calendar. Enter
the time and repeat the process for the End Time
and Date. The time is entered as Hours: Minutes:
Seconds. For time settings use the drop down
menu to select AM or PM
If an incorrect date is selected a Pop Up will
appear. Click “OK” to return to the previous
screen. Re-enter the correct date.
Selecting Probes and Ports
Commanders Filter function allows the operator
to select up to three probes by point and click to
activate a drop down menu. The probes are
displayed with their name, or if not named as
their probe ID.
If more than one probe is select the sort function
will OR the probes providing results for each of
the selected probes. Click to make a selection.