American Fibertek Commander C10e-PoE/C10p-PoE User Manual
Page 75
75
PortFlow™: Setup: Warning and Alarm
Setting the Email Address
Input Email addresses that you want to receive warning and alert messages. You can enter as
many email addresses as you want. Please make certain to separate each address with a space.
Entering Port Warning and Alarm Levels
This process starts by knowing what values to input. Commander reads and displays six previous
port traffic readings each with 10 second duration. In total the previous 1 minute of activity is
displayed. This values are used to help determine the values you want to program for warnings
and alarms. Data values will tend to change dramatically, however once a video signal quality
level and reproduction rate is determine, those values should remain constant. When video is
present as the input to a port the six values should be averaged to determine your settings.
Input the alarm and warning values.
Settings for Log/Alert/Email and Auxiliary activation and durations are programmed in the same
manner as Sensor probes, alarms and auxiliary.