American Fibertek Commander C10e-PoE/C10p-PoE - Manual (Page 3)

3
Before You Start: Limitations of Liability/ Disclaimer of Warranty/ Safety Instructions
Limitations of Liability:
This Commander Instruction and Operation manual is provided “as is” without warranty of any
kind, either expressed or implied. This includes but is not limited to: implied warranties of
merchantability, or fitness for any reason or purpose. This limitation also includes non-
infringement of any third party’s rights.
The reader acknowledges this publication could include technical inaccuracies or typographic
errors. American Fibertek reserves the rights to add or make changes to the product represented in
this manual and to add or change the information presented in this manual as required.
Disclaimer of Warranty:
In no event or under any condition will American Fibertek be liable to any party or persons
except for replacement or repair of Commander under the terms and conditions of its stated
warranty. American Fibertek will not be liable for the following conditions:
1. Any damages or losses including, without limitation, direct, indirect or otherwise, any
consequential or exemplary damages that arise out of or related to the Commander.
2. Personal injury or any damage resulting from inappropriate use or negligent on the part of the
user in proper operation as stated by American Fibertek.
3. Unauthorized disassembly, repair, or modification of the product by the user.
4. Any problem, inability to perform to stated specifications, inconvenience, loss or damage
arising from the combination of Commander with third party devices, software, browsers or
interfaces.
5. Any claim or action for damage that is brought about by an individual, or group of individuals,
or organization, due to violations or privacy that result from information, including saved data
that for any reason becomes public.
6. Any claim, problem or consequential inconvenience, loss or damage arising from improper
detection of sensor or alarm functions.
7. Any claim resulting from the loss of data created or stored by Commander caused by the need
to reboot due to improper operation.
8. Any claim resulting from inability to communicate with Commander due to changes made to
third party browsers.
Safety Instructions:
1. Please read these instructions completely prior to operating Commander for the first time.
2. Keep these instructions in a place where they can be referred to as required.
3. Follow all warnings as indicated.
4. Follow all instructions as indicated.
5. Do not use Commander near water or areas of dampness.
6. Clean Commander only using a dry lint free cloth.
7. Do not block any of the ventilation openings.
8. Do not use next to high heat or cold sources that exceed the manufacturer’s environmental
ratings.
9. Do not misuse polarized or grounding type plugs.
10. Do not remove the grounding plug.
11. Protect the power cord from being step on or pinched.
12. Only plug the cord into a proper receptacle.
13. Only use accessories and attachments designed for Commander or approved by American
Fibertek.
14. Operate, mount, and transport Commander only in horizontal position.
15. It is recommended that Commander be operated with power sources that include proper EMI,
RFI or power surge protection, or if required the customer take proper steps to assure problems
from these conditions will be minimized.