American Fibertek Commander C10e-PoE/C10p-PoE - Manual (Page 48)

48
Refresh Rate
Commander’s status is viewed over the network on a client computer. Changes can only be
viewed when the client’s web page is refreshed. This section allows the operator to select the
refresh rate duration or no refresh at all. The Refresh status is reflected in the Status View’s
header.
Refresh Rate Enabled/Disabled
This selection enables or disables the client’s status view refresh. Refresh must be enabled to
avoid a 20 minute auto log and to see event warnings. If Commander is in the no refresh rate, the
title will be red.
Event Warning Enabled/Disabled
This selection enables or disables the Event Warning feature. It must be enabled in order to pop
ups when the Commander’s Status View is minimized. It is only available in Refresh mode.
Refresh Rate/Event Warning Status Confirmation
This section will confirm the sections made for items 8,9 and 10. If this confirmation does not
reflect the desired operation, please change these settings. If the Event warning is off, it will not
appear in this area.
Commander must be in the refresh mode with events warning enabled in order to see pop ups and
display tool bar warnings.