American Fibertek Commander C10e-PoE/C10p-PoE - Manual (Page 40)

40
Time & Date
The Time/Date function defines the formats for
date and time, the time zone commander is
functioning within, and the current data and
time. Start by setting the Date and Time Display
Time/Date Setup: NTP Active
Commander’s time reference can be set by NTP
(Network Time Protocol). If NTP is active the
time date setup will have the appearance to the
right. You will not be able to set a new time or
date. The screen will indicate “Using NTP
Time and Date Time Zone Function
Time/Date Setup: Selecting Time Zone
Select the time zone using the drop down menu.
Time/Date Setup: Time Zone Map Function
Click on the clock icon to display a world map.
Each dot on the map represents a time zone.
Moving your mouse over the dot will display the
time zone’s name
Click Change to select and accept the time zone
Time/Date Setup: New setting
Press up “Update” to accept the new time
settings. A pop up will appear informing it
will take 30 seconds to process the change.
Click OK to accept. Cancel will return the
screen to the previous setting.