American Fibertek Commander C10e-PoE/C10p-PoE User Manual
Page 86
Advertising
86
Switch Flow: Disabling a Port
Disabling a Port:
Using the drop down, select “Disable” for an individual port and click on Save.
A pop up will appear asking you to confirm your choice.
Selecting OK will bring up another pop up
warning you that changes may result in you
losing your network connection.
Once a port is disabled its name convention will appear as
RED
and the port will disabled.
Once the port is disabled, it can not be accessed
and will not appear in certain set up modes.
Advertising