American Fibertek Commander C10e-PoE/C10p-PoE - Manual (Page 60)

60
Selecting Warning and Alarm Types
Commander offers a choice of two different
Warning and Alarm types. Each provides a drop
down menu for selecting Temperature, Airflow
or Humidity.
If more than one Warning or Alarm Type is
selected, the Filter function will “or” the
selections.
The conditions will define the probe. If two
probes are selected along with Temperature
Warning, Airflow Warning, Humidity Alarm
and Temperature Alarm, the Filter will show
results if anyone of the selected conditions is
true for anyone of the selected probes.
Click to make a selection
Selecting Alarm Contacts
Commander provides searching for one external
alarm contact. Click the drop down menu to
display the alarms, which are shown with there
assigned names or default name is none has been
assigned. Click to select the alarm contact.
The selected search result will AND the Alarm
Contact with the probes you have previously
defined. A positive search result requires that
BOTH the defined or conditions for the probes
AND the defined alarm contact must be true.
Selecting Auxiliary Outputs
Commander provides selecting one auxiliary
output. Click the drop down menu to display the
auxiliary, which are shown with there assigned
names or default name if none has been
assigned. Click to select the alarm auxiliary
output.
The selected search result will PLUS the
Auxiliary Output with the probes you have
previously defined. A positive search result
requires that BOTH the defined or conditions for
the probes PLUS the defined auxiliary output
must be true.