American Fibertek Commander C10e-PoE/C10p-PoE - Manual (Page 35)

35
File Doesn’t Match
If the upgrade file is not accepted, the following
alert will appear. Clicking OK will return to the
previous screen and allow the selection process
to be repeated.
Completing the Upload Process
If the correct file is selected a time bar will
appear at the upper end of the screen indicating
the upload is in process.
Successful completion of the Upload will be
indicated by the following alert box.
Master Admin Save Configuration
Clicking on the Save Configuration Mode button
will display the Save/Restore Configuration
screen. This function allows existing
programming on Commander to be saved to a
client computer.
Restore allows programming from a client
to be restored to Commander.