American Fibertek Commander C10e-PoE/C10p-PoE - Manual (Page 91)

91
VLAN Settings: Disabling Ports
Disabled Ports:
If a port has been disabled in the Switch Flow it will appear in RED. If a port has been selected
for monitoring the port is also removed from further programming. The word “monitoring” will
appear in the notes box. In both cases the port will removed from further programming and no
set up screen will appear for that individual port(s).
If a port is in the Trunking Mode:
The word “Trunking will appear in the notes box
Default:
At any point in the programming point and click on Default will return the settings to their default
position