Anritsu 373XXA - Manual (Page 170)

SERVICE LOG ERROR MESSAGES APPENDIX B
B-14 373XXA MM
Error Message Description
Response after Indefinite Re-
sponse discarded This error is generated when the 373XXA’s output queue has already received an Ar-
bitrary ASCII response data element and an attempt is made to place another re-
sponse data element of any kind into the queue. The new response data element is
discarded.
Interrupted - Response data dis-
carded This error is detected when the output queue contains unread response data and the
controller sends a new program message. The response data is discarded.
Unterminated - Partial PM will be
executed This error is detected when the 373XXA’s input queue is currently receiving a program
message but has not yet received the end message, and the controller attempts to
read response data from the 373XXA. The partial program message in the input
queue is executed as if it were properly terminated.
Deadlock - Response data dis-
carded This error is detected when both of the 373XXA’s input and output queues are full and
the controller attempts to send another data byte. In order to prevent bus deadlock,
the contents of the output queue are discarded.
7205 GPIB DEVICE DEPENDENT ERROR DESCRIPTIONS
Q_SEND failure in [a procedure
name] An unsuccessful attempt was made to send a message to a task.
The procedure name is the place in the software where the error was detected.
Q_RECEIVE failure in [a proce-
dure name] A failure was detected while waiting for the reception of a message from a task.
The procedure name is the place in the software where the error was detected.
Unable to allocate memory in [a
procedure name] An attempt was made to allocate some temporary memory in order to accomplish a
task directed in the program message.
The procedure name is the place in the software where the error was detected.
Unable to release memory in [a
procedure name] An attempt was made to return some temporary memory within a task and the return
failed for some reason.
The procedure name is the place in the software where the error was detected.
Unable to get service/error log An unsuccessful attempt was made to get a copy of the service or error log.
Unable to get calibration term An unsuccessful attempt was made to get a calibration term.
Unable to get raw or corrected
data An unsuccessful attempt was made to get raw or corrected data.
Unable to get final data An unsuccessful attempt was made to get final data.
Unable to get setup or data An unsuccessful attempt was made to get the frequency list from the database.
Unable to get setup An unsuccessful attempt was made to get a front panel setup.
Table B-3. GPIB-Related Error Messages (7 of 8)