Front panel test 3-7, Ex ter nal key board interface test 3-7, Printer in ter face test 3-7 – Anritsu 373XXA User Manual
Page 43: Operational tests peripherals and interfaces
Front Panel Test
This test verifies that the control keys in each of the 373XXA key groups
are functioning correctly.
Procedure:
Step 1.
Press the
Option Menu
key (Enhancement key group) to dis-
play the OPTIONS menu.
Step 2.
Select DIAGNOSTICS from menu; then in sequence se-
lect: PERIPHERAL TESTS, and then FRONT PANEL.
See diagram below.
Step 3.
Follow instructions on the screen until test is completed.
If test fails, proceed to Chapter 5, Troubleshooting.
External Keyboard
Interface Test
This test verifies that the 373XXA external keyboard interface is func-
tioning correctly.
Equipment Required:
An IBM compatible keyboard is required for this test.
Procedure:
Step 1.
Press the
Option Menu
key (Enhancement key group) to dis-
play the OPTIONS menu.
Step 2.
Select DIAGNOSTICS from menu; then in sequence se-
lect: PERIPHERAL TESTS, and then EXTERNAL KEY-
BOARD. See diagram above.
Step 3.
Follow instructions on the screen until test is completed.
If test fails, proceed to Chapter 5, Troubleshooting.
Printer Interface Test
This test verifies that the 373XXA printer interface is functioning cor-
rectly.
OPERATIONAL TESTS
PERIPHERALS AND INTERFACES
373XXA MM
3-7
OPTIONS
TRIGGERS
REAR PANEL
OUTPUT
DIAGNOSTICS
MULTIPLE SOURCE
CONTROL
PRESS <ENTER> TO
SELECT
DIAGNOSTICS
START SELF TEST
READ SERVICE LOG
INSTALLED OPTIONS
PERIPHERAL TESTS
TROUBLESHOOTING
(FOR SERVICE
ONLY)
HW CALIBRATIONS
(FOR SERVICE
ONLY)
PRESS <ENTER> TO
SELECT
PERIPHERAL TESTS
CRT DISPLAY
FRONT PANEL
EXTERNAL KEY-
BOARD
PRINTER INTERFACE
GPIB INTERFACE
PREVIOUS MENU
PRESS <ENTER> TO
SELECT