Positioning the speakers – Sony DAR-RD100 User Manual

Page 16

Advertising
background image

16

GB

Positioning the speakers

For the best possible surround sound, all the
speakers other than the subwoofer should be the
same distance from the listening position (

A

).

However, this system allows you to place the
centre unit up to 1.6 m closer (

B

) and the

surround speakers up to 4.6 m closer (

C

) to the

listening position.
The front speakers can be placed from 1.0 to 7.0 m
(

A

) from the listening position.

Note

Do not place the centre unit and surround speakers
farther away from the listening position than the front
speakers.

Note on subwoofer placement

If the subwoofer is placed too close to a CRT TV
or projector, magnetic leakage may interfere with
the video signals and cause colour irregularity.
Should this happen, turn off the TV or the
projector, wait for 15 to 30 minutes, and then turn
it on again. If the problem persists, try the
following:
– Place the subwoofer at least 0.3 m away from the

TV or the projector.

– Remove any magnetic object near the subwoofer

(healthcare devices, toys, etc.). Magnetic latches
on TV stands may also cause the problem.

To install the speakers on a wall

1

Prepare screws (not supplied) that are suitable
for the hole on the back of each speaker.

2

Fasten the screws to the wall.
The screws should protrude 5 to 7 mm.

3

Hang the speakers on the screws.

4mm

30mm

4.6mm

10mm

Hole on the back of the speaker

5 to 7 mm

Hole on the back of the speaker

4.6 mm

10 mm

Advertising