Basic speaker settings (“sp setup”) – Sony DAR-RD100 User Manual
Page 92
92
GB
4
Press
M
/
m
to select the item you want to
set.
Example: “FRONT DIST” (front speaker
distance)
5
Press ENTER or
,
.
6
Press
M
/
m
to select a setting.
The setting is applied to the speaker system.
To return to the previous layer
Press
<
.
To turn off the AMP menu
Press AMP MENU again.
Basic Speaker Settings
(“SP SETUP”)
You can input the speaker positions and select
whether or not to engage any centre or surround
speakers.
Select “SP SETUP” in the AMP menu. To use the
AMP menu, see “Using the AMP Menu”
(page 91). For details about setting speaker
distance, see also “5. Basic speaker setup”
(page 29).
The default settings are underlined.
Notes
• The settings below may not be the defaults if you
followed “Step 8: Initial Setup” (page 28) to reflect the
current speaker placement.
• Change your current settings again should you change
the speaker positions.
“CENTER SP” (centre speaker)
“SURR SP” (surround speaker)
m
L
R
“CENTER YES”
Normally select this.
“CENTER NO”
Select this if no centre
speaker is used.
“BEHIND”
Select this if surround
speakers are located in
B
.
“SIDE”
Select this if surround
speakers are located in
A
.
“NONE”
Select this if no surround
speaker is used.
90
20
45
A
A
B
B