Adaptec ANA-62000 - Manual (Page 103)

8-21
Duralink64 Port Aggregation for Windows NT
Figure 8-19. Add to Chart Window
3 From the Object list box, select ADPTSF.
4 In the Instance box, click the port or group, and then click the
appropriate setting from the Counter box.
5 To distinguish ports and groups in the Performance Monitor,
adjust the following parameters:
Color — is preset by the program for each selected group or
port. You can set a specific color from the Color list box.
Scale —you can set the scale of the plot for better viewing.
Width —This allows you to set the width of the plot line.
Style —allows you to set the type of line that will be plotted for
the selected group.
6 Repeat steps 4 and 5 for each appropriate port or group.
7 When you are done, click Done.
❒